Dry state starts bare. Compare fitted 5-sheet plan against requested 3-sheet full-tower drape.
Nothing stays on speakers before rain; no cabinet gets removed.
Placement derived from _light.fixtures.layout.build_layout.
Drag to orbit, scroll to zoom.
Plan shown
Cover sequence
Inspect rain pieces
View
Two purchase plans
Plan
Sheets
Rain deployment
Home Depot total
Tradeoff
3-sheet full tower
1 row + 2 tower
Row drape, then one top-down drape per complete tower
$299.54
Fewest pieces and no seams on either tower; each 24×24 sheet is large in wind.
5-sheet fitted
1 row + 2 wraps + 2 caps
Row, both Warhammer wraps, then both Mantarray caps
$217.80
$81.74 cheaper and smaller pieces; more pieces and tower seams.
3-sheet option — exact fit
Sheet
Qty
Geometry needed
Buy size
Ground-edge spare
Devastator row
1
13.36 × 11 ft
15 × 20 ft
Ample
Whole tower AL / AR
2
22 ft 8.4 in × 22 ft 8.4 in
24 × 24 ft
6.3–7.8 in each edge
How one tower sheet covers everything. Vertical run is twice 48 in Warhammer + 24 in
riser + 40.2 in Mantarray. Horizontal run adds both stepped shoulders and the 24 in top.
Total is 272.4 in in either direction. Center the 24 × 24 sheet on the Mantarray top, lower
four corners, smooth it over both shoulders, then cinch around the Warhammer base.
No tops removed. Sheet comes from above after power-down. It covers the wooden riser
because it must pass over it, but nothing is threaded through a slit and nothing is lifted.
Cabinet bottoms stay open; do not tuck tarp underneath and create a water basin.
Main risk: 24 × 24 ft is 576 sq ft. Deploy with two people per tower and keep sheet
controlled until centered; loose sheet will catch wind. This option is mechanically simpler,
not physically smaller.
Both products appeared available for purchase in Home Depot's national listing.
Store-level inventory was not checked because no delivery ZIP/store was selected.
Cheaper 24 × 24 option exists, but fit confidence is lower.BOEN 10 Mil waterproof 24 × 24
is $84.99 each; 3-sheet total becomes $228.96. Home Depot reviews report BOEN finished sizes
shorter than label dimensions. Use Sigman for this close fit: Sigman says finished tarps are
usually within 1–3 in of nominal size.